I-Bar Sealers are designed for shrink film packaging, but can also be used for sealing poly bags as it works similar to a hand sealer. Sealers usually come with round wire for cut and seal and depending on the model of the machine, film up to 34" wide and 0.025mm (100 gauge) thickness can be used. All sealers are of steel construction including the work base for quality and durability. Additional features depending on sealer model include timer, heat gun holder, film roller and film separator.
W-Series I Bar Sealers are ideal for shrink wrap packaging as the sealers are accompanied with a ROUND wire for cut and seal applications.
W-Series I-bar sealers come in an ivory color. Lengths that are available: 14", 20", 26", 30" and 35" lengths with a round or 2.7mm seal width.
Repair kits are available. See Shrink Equiptment Supplies.
Film and heat gun are sold separately.
Easy to operate. Insert the product between the two layers of center fold film and press down the sealing bar. Pull the sealed package slightly away from the sealing bar. The element wire will cut and seal the edge. Now turn it over and seal the other side. Apply hot air using heat gun to shrink the film uniformly.
The red heat gun is the heavy duty version.
Ideal for quick and easy shrink film packaging
Steel construction for heavy duty use and durability
Works with heat gun or shrink tunnel
L-bar sealers are designed for shrink film packaging, in one step, you can cut and seal film up to 26" wide depending on the model of the sealer. Steel constructed film separator/work table and film roller with twin perforating hole punchers & film guide now comes standard with each sealer.
L-Bar Sealers are easy to operate. Set the timer. Insert the product between the 2 layers of center fold film and press down the sealing bar. Slightly pull the package away from the machine. The element wire will seal the edge and cut off the film. Apply hot air using a heat gun or shrink tunnel to shrink the film tightly around the package.
W-Series Sealers are ivory colored. Heating element is found on the upper jaw of the sealer. The first number in the model number denotes the vertical length of the sealing bar. Sealer is equipped with adjustable height work table and heat gun holder. Manufacturer’s replacement kit includes 3 elements.
YC-Series L-Bar sealers are blue colored. The first number in the model number denotes the vertical length of the sealing bar. Manufacturer’s replacement kit includes 2 elements, 1 washer, 1 hook, and 1 spring. Sealer also comes complete with either the YC-450WR or YC-600WR work table w/film roller.